eLaptopBattery.co.uk's Blog

Your Best Source for Laptop Batteries & AC/DC Adapters

Now I will show you how to replace a HP Probook 4510 keyboard 

After you receive a new HP Probook 4510 Keyboard  , you might question the best way to replace the laptop keyboard on your own. Ideas provide you with top tips to follow along with:

First, take away the two screws from the foot of laptops that are holding lower the laptop keyboard bezel. The bezel may be the bar sitting right most importantly the function secrets.

Second, turn your laptop over, open the coverage and place a charge card or guitar pick between your bezel and also the laptop screen. The bezel has pegs relaxing in holes. You have to pry in the bezel gradually. There might be a little of the popping noise when it’s removed.

Third, hold onto the  HP Probook 4510 Keyboard in the finish nearest towards the screen and lightly pull it from the touch-pad finish and switch it over. You can observe the ribbon connected to the bottom from the keyboard. There’s just a little plastic connector holding the ribbon towards the laptop. Pull up carefully around the two tabs to really make it unlock. One tap is situated on each corner from the connector. Be very gentle if you do this because this is among the parts which become damaged most frequently when altering a keyboard. Then your ribbon is going to be launched.

Then, pull the ribbon from the connector carefully and take away it together with the whole keyboard.

Finally, put the  HP Probook 4510 Keyboard face lower to place the brand new keyboard, so you’ve a simple accessibility ribbon. Make certain the laptop keyboard is arranged, then when you switch it go back over the secrets have been in the right position. Keep your ribbon straight constantly. Twisting it’ll damage it. Put the ribbon within the connector. It only gets into one of the ways. Once in correct place, push lower around the connector tabs to lock it. Now switch the laptop keyboard over and slide it lower toward the numbered and go ahead and take bezel and line the pegs track of the holes and push it in position. Then turn laptops over and replace the 2 screws you taken off the underside.

Now you can energy in your  laptop repair helps   if the keyboard works. If it’s working, you’re effective. The next time, whenever you face this type of problem, you may make it solved effectively.

For more laptop repair helps , please visit :