Repair Help-How to Repair Gateway Laptop Keyboard
Due to excessive typing or just because the keyboard is not sturdy or so, these parts of the laptop can easily break. It does happen with usual keyboards, so imagine this is very likely to occur when we are dealing with a portable system. But if just a key is broken, you can easily fix it with the help of the laptop repair helps service , without having to replace the entire keyboard. If you want to manage a key repair on Gateway laptop keyboard , you don’t have to take your laptop in service or see professionals, with some useful steps you can manage everything yourself. All you need are some fine tweezers and a replacement key kit.
First of all, remove the key cover from a key that is working, so you leave the inside intact. You can see this way how the key should be put back correctly. Locate the key retainers, which consist of small plastic parts that hold the rubber gasket in place. In most occasions, there are two of them and snap together in four different points. Use the tweezers and lift the retainers gently and see exactly where they snap together and where do they connect. Unsnap the retainers in order to replace the rubber gasket underneath and start by unsnapping the inner retainer from the outer one, take your time and do one side at a time. Pull the gasket with your fingers in the end. If you replace the retainers, assemble the plastic key retainers to resemble the key that is working. If the rubber is broken, replace the rubber gasket instead. Moreover, push the key retainer over the rubber gasket until you snap it in place on the Laptop Keyboard and follow the revere procedure with the retainers linked together, snapping one end in and sliding the retainers over the gasket and the other end on the keyboard base. Finally, just snap the key cover back on and push until you feel the key snaps in place. Now open a document or something and see if the key is working properly. You can find single replacement keys for sale online, so that should not be a problem.
You might also want to replace the key on a Gateway laptop and for this you need the laptop key replacement kit and the flathead screwdriver. The process will take around 15 minutes, so you should be able to finish it when you have all the needed parts and a bit of patience. Grab the flathead screwdriver and pry up the broken key out of the keyboard. Remove the two retainers of the broken key (these hold the key to the Gateway laptop keyboard ). You can do it with your fingers, or using the flathead screwdriver. These are connected to the laptop via four points located in the corners. Now insert the new key retainer in the empty slot and make sure that all four screws are secured. Attach them the same way your old retainer came out. Press the key in the slot until you hear a solid snap.
Both processes are easy and they are alternatives to getting a new Gateway laptop keyboard . There is no use if only one key is broken or a few. If the entire keyboard is not working properly and you can’t use the majority of keys, then you should buy a new keyboard. Replacing it can be done personally and you can find any part you want for your laptop online.
For more laptop repair helps , please visit :
| http://www.elaptopbattery.co.uk/ |
Tags: hp keyboard
